Rotel RVE-1060 Manuel du propriétaire télécharger pdf (Page 19)

19

English

To select an output mode from the

remote:

Press one of the four OUTPUT buttons on

the remote.

NOTE: Either the 480p or 575p option will be

available, depending on whether the source

input is NTSC or PAL standard. Use the 480p

button on the remote with an NTSC source;

use the 576p button with a PAL source.

To select an output mode from the

front panel:

Press the OUTPUT button to step through the

available options.

The current selection is shown on the SYSTEM

STATUS screen of the ON-SCREEN DISPLAY

and by LEDs above the OUTPUT button on

the front panel.

Select an Aspect Ratio

The RVE-1060 can use advanced stretch mode

algorithms to stretch a 4:3 aspect ratio video

signal to ﬁll a 16:9 widescreen TV.

Press the ASPECT button on the remote to

toggle between the 4:3 aspect ratio and

16:9 aspect widescreen display.

NOTE: The RVE-1060 cannot convert wide-

screen aspect video to 4:3 aspect ratio.

Setup Button

Press the SETUP button on the remote to ac-

cess the SETUP menus. See the following

section of the manual.

Cursor Buttons

The CURSOR buttons and the ENT button on

the remote are used to navigate the SETUP

menus. See the following section of the man-

ual for details.

SETUP

The RVE-1060 features two types of informa-

tion displays to help operate the system. The

ﬁrst consists of simple status displays that ap-

pear on the TV screen are changed. These

status displays are self-explanatory.

A more comprehensive ON-SCREEN DISPLAY

(OSD) menu system is available at any time

by pressing the SETUP button on the remote.

These OSD menus guide you through the

conﬁguration of the RVE-1060. In general,

the settings made in the conﬁguration pro-

cess are memorized as default settings and

need not be made again for normal opera-

tion of the unit.

Conﬁguring Menus for

NTSC or PAL Monitors

The OSD menu system is conﬁgured at the

factory for display on NTSC TV monitors. To

use the RVE-1060 with PAL TV monitors, you

must change the menu conﬁguration:

To reconﬁgure from NTSC mode to

PAL mode:

1. Press and hold the OUTPUT button on

the front panel for several seconds. The

OUTPUT LEDS above the button will begin

ﬂashing rapidly, indicating PAL mode.

2. Press the STANDBY button on the front

panel to store the new setting.

To reconfigure from PAL mode to

NTSC mode:

1. Press and hold the OUTPUT button on

the front panel for several seconds. The

OUTPUT LEDS above the button will begin

ﬂashing slowly, indicating NTSC mode.

2. Press the STANDBY button on the front

panel to store the new setting.

Menu Basics

Navigation Buttons

The following remote control buttons are used

to navigate the OSD menu system:

SETUP

ENTENT

SETUP button: Press to display the SYSTEM

STATUS screen. From the SYSTEM STATUS

screen, press the ENT button to display the

MAIN MENU screen which has links to all

other menus. If a menu is already visible, push

this button to cancel the display.

DOWN/UP Buttons: Press to move up and

down in the lists of menu items that appear

on the OSD screens.

LEFT/RIGHT Buttons: Press to change the

current settings for a selected menu item on

OSD screens.

ENT Button: From the SYSTEM STATUS

screen, press ENT to display the MAIN MENU

screen. From any other OSD screen, press ENT

to conﬁrm a setting and return to the MAIN

menu or to EXIT the menu system.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 112 113

Commentaires sur ces manuels

Pas de commentaire