Rotel RB-1582MKII Manuel du propriétaire télécharger pdf (Page 2)

RB-1552MKII/RB-1582MKII Stereo Power Ampliﬁers

WARNING: There are no user serviceable parts inside. Refer all

servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not

expose the unit to moisture or water. Do not expose the unit to

dripping or splashing. Do not place objects filled with liquids, such

as vases, on the unit. Do not allow foreign objects to get into the

enclosure. If the unit is exposed to moisture, or a foreign object

gets into the enclosure, immediately disconnect the power cord from

the wall. Take the unit to a qualified service person for inspection

and necessary repairs.

Read all the instructions before connecting or operating the

component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and

on the product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of

unobstructed clearance around the unit.

Do not place the unit on a bed, sofa, rug, or similar surface that

could block the ventilation openings. If the unit is placed in a

bookcase or cabinet, there must be ventilation of the cabinet to

allow proper cooling.

Keep the component away from radiators, heat registers, stoves,

or any other appliance that produces heat.

Rotel products are designed to comply with

international directives on the Restriction of

Hazardous Substances (RoHS) in electrical and

electronic equipment and the disposal of Waste

Electrical and Electronic Equipment (WEEE). The

crossed wheelie bin symbol indicates compliance

and that the products must be appropriately recycled

or processed in accordance with these directives.

Important Safety Instructions

WARNING: The rear panel power cord connector is the mains

power disconnect device. The apparatus must be located in an open

area that allows access to the cord connector.

The unit must be connected to a power supply only of the type

and voltage specified on the rear panel. (USA: 120 V/60Hz,

EC: 230V/50Hz)

Connect the component to the power outlet only with the supplied

power supply cable or an exact equivalent. Do not modify the

supplied cable. A polarized plug has two blades, with one wider than

the other. A grounding plug has two blades plus a third grounding

prong. These are provided for your safety. Do not defeat grounding

and/or polarization safety provisions. If the supplied plug does not

fit your outlet, please consult an electrician for replacement of the

obsolete outlet. Do not use extension cords.

The main plug of the power cordset is a disconnect device of the

apparatus. In order to completely disconnect the apparatus from

the supply mains, the main plug of the power cordset should be

unplugged from the mains (AC) outlet. The stand-by LED indicator

will not be lit up to show the power cord is unplugged. The disconnect

device shall remain readily operable.

Do not route the power cord where it will be crushed, pinched,

bent, exposed to heat, or damaged in any way. Pay particular

attention to the power cord at the plug and where the cord exits

the back of the unit.

The power cord should be unplugged from the wall outlet during

a lightning storm or if the unit is to be left unused for a long

period of time.

This apparatus shall be connected to a main socket outlet with a

protective earth connection.

Use only accessories specified by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf

system recommended by Rotel. Use caution when

moving the unit in a stand or rack to avoid injury

from a tip-over.

Use Class 2 wiring for speaker connections to ensure proper

insulation and minimize the risk of electric shock.

Immediately stop using the component and have it inspected and/

or serviced by a qualified service agency if:

• The power supply cord or plug has been damaged

• Objects have fallen or liquid has been spilled into the unit

• The unit has been exposed to rain

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

RB-1582MKII

For RB-1552MKII only:

This symbol means that this unit is double insulated.

An earth connection is not required.

Pin Assignments

Balanced Audio (3 pole XLR):

Pin 1: Ground / Screen

Pin 2: In phase / +ve / Hot

Pin 3: Out of phase / -ve / Cold

1 2 3 4 5 6 7 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Rotel RB-1582MKII Manuel du propriétaire Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical supplémentaire Rotel RB-1582MKII