Rotel RSX-1550 Manuel du propriétaire télécharger pdf (Page 27)

26 27

English

RSX-1550 Surround Sound Receiver

26 27

English

RSX-1550 Surround Sound Receiver

ZONE Button eU

Either of these buttons serve as a standby button for the currently-selected

remote zone, toggling the zone on or off. Select the desired zone using

the front-panel SEL or remote control REC button as described above.

UP/DOWN Buttons T

These two buttons on the remote are used to move the cursor up or

down to select lines in the OSD menus. These buttons are also used

in conjunction with the TONE button to make CONTOUR/TONE

adjustments.

+/– Buttons T

These two buttons on the remote are used to change settings on a

selected line in the OSD menus. Also used for selecting options in some

surround modes.

Speaker Selection Buttons E

These three buttons on the remote are used to select a speaker or group

of speakers for temporary level adjustments. In addition, the C button

is used in conjunction with the UP/DOWN buttons for temporary

adjustment of group delay/lip synch.

EQ Button K

This button on the remote is used to turn on and off the Cinema EQ

feature, a high-cut ﬁlter useful for older movie soundtracks.

TONE Button X

This button on the remote is used for temporary Contour adjustments.

It toggles between high frequency (HF) and low frequency (LF) modes.

Once a mode is selected, the UP/DOWN buttons are used to make the

adjustments to the speaker or speakers selected in the Contour Setup

menu.

Note: Permanent contour adjustments can be made using the

Contour Setup menu.

Surround Mode Buttons =W

Five buttons on the remote (2CH, PLC, PLM, 5CH, 7CH) and four

buttons on the front panel (2CH, DOLBY PLIIx Mode, DTS/Neo 6, DSP)

allow direct selection of certain surround modes. The function of these

buttons varies depending on the type of recording being played. See the

Manually Selecting Surround Modes section for detailed information.

SUR+ Button V

This button on the remote is used in conjunction with the +/– buttons

for manual selection of surround modes and features. See the Manually

Selecting Surround Modes section for information.

DYN Button L

Use the DYN button on the remote to select the dynamic range control

setting in Dolby Digital surround mode.

MENU/OSD Button S

Push this button on the remote to turn on the OSD menu system. If the

menu system is already visible, push this button to cancel the display.

Press and hold the button to turn off the front-panel display.

ENTER Button T

The ENTER button is used to conﬁrm and memorize various settings in

the setup and operation of the receiver. Its use is described in detail in

the relevant sections.

BAND Buttons 4I

Press either BAND button to toggle between AM and FM reception.

TUNING Buttons 9P

The TUNING buttons (labeled CH UP/DOWN on the remote control)

provide three different tuning functions, depending on the mode of

operation: frequency tuning, preset tuning, or selection of an RDS/RBDS

program type.

MEM Button 0B

The front-panel MEMORY button or remote control MEM button (also

labeled “X”) is used with the NUMERIC buttons to store station presets.

NUMERIC Buttons 7B

The NUMERIC buttons on the front panel or the remote are used to enter

the number of a memorized station preset or for direct entry of a station

frequency.

DIRECT Button 8

FRQ DIRECT Button

The front-panel DIRECT and remote control FRQ DIRECT buttons are used

in conjunction with the NUMERIC buttons for direct entry of a station

frequency in AM/FM tuning.

MONO Button 9

FM MONO Button

The front-panel MONO and remote control FM MONO buttons change

the FM mode from stereo reception to mono reception.

TUNE Button F

PRESET Button

P-TUN Button

The TUNE, PRESET, and P-TUN buttons on the remote are used to select

FREQUENCY tuning or PRESET tuning modes. The TUNE and PRESET

buttons select the modes directly. The P-TUN button toggles between the

two modes.

SCAN Button M

Preset scan tuning automatically scans through the memorized station

presets, playing each for 5 seconds. Press the SCAN button on the

remote to begin preset scanning. Press the button again to stop the

scanning and listen to the desired preset.

RDS/RBDS Buttons

Four remote control buttons (DISP, PTY, TP, TA) are used to activate

various RDS/RBDS tuning features. See the RDB/RBDS Tuning section of

the manual for detailed information.

Output Button

Press the OUTPUT button to cycle through available monitor resolutions.

PIP Button

POP Button

These two buttons can be used to set the HDMI AUDIO mode (See the

Video/HDMI menu in the Setup section of this manual.) Press the PIP

button to select AMP MODE, to prevent audio signals being sent to the

TV, or press the POP button to select TV mode.

RSX-1550 English v2.indd 27 27/8/08 14:22:14

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Rotel RSX-1550 Manuel du propriétaire Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs AV Rotel RSX-1550